MSFS Setup
Tool · Controller inputBrowser check

Flight Stick Axis Test for MSFS

Check which axes and buttons your browser can read before you troubleshoot simulator bindings.

Controller input

This page reads controller input exposed by your browser. It cannot see MSFS bindings, calibrate hardware, certify a device, or recommend sensitivity values.

Press Start test, then move or press a control if your browser asks for permission.

No controller is visible yet. Connect it, press a button once, then start the test.

Axis and button readings will appear here while the test is running.

How to use this check

  1. Connect the controller to your PC and close other controller tools if they interfere.
  2. Press Start test. If the browser asks, move a control or press a button once.
  3. Select a controller if more than one appears, then move each axis through its range and press its buttons.
  4. Use the MSFS HOTAS setup checklist to check simulator bindings and conflicts.

Names, axes, button counts, and values depend on what the browser and device expose. A missing controller here does not prove it is unsupported by MSFS.